pro2_av2_cp2_cp2e_rack2_pac2_4.003.0015.txt
- Fixed a problem with ther route symbols where If the user tried to disconnect
all from a given C (or E) that didn't exist, the system would crash.
- NAT remote config now does not need a reboot to take effect.
- Hitting the HELP button on the NAT configuration pages does not require a
reboot.
- After 3 failure on login for the NAT pages, the 403 forbidden message is
sent back to the browser.
- Cleaned up the interface for the NAT configuration pages so that it will not
affect any active console.
- Modified the Xmodem receive for Compact Flash to eliminate the Xmodem
padding.
- Corrected a problem with Cresnet discovery.
- Corrected problem where Ethernet parameters were not getting saved in
RestoreFactoryDefaults.
- Systems with 1 Ethernet port now display status of only that port.
- Expose HOSTNAME, NATENABLE and NATREMOTE in the Ethernet help menu.
- Removed XGETFILE & XPUTFILE from main help menu.
- Free command now indicates which flash (compact or internal) that it is
showing stats for.
- Increased the max. file size for the TYPE command to 20K
- Fixed a problem with FindNext giving a erroneous error message.
- Added user verification for the RESTORE command.
- Now clear the NAT portmap upon RestoreFactoryDefaults.
Version 2.000 (Release)
May 16, 2002
- Removed the Domain Name from the NAT configuration pages.
- Added a command SHOWPORTMAP to display the NAT portmaps.
- Temporarily removed the SMTP_Send_Mail routine.
- Added command KILLSOCKET to cancel a TCP console session.
- Temporarily disable the CNETID command from changing the net ID so that
slave mode would not be supported in this build.
- Changed the allowable connection on Telnet and CTP to 2.
- Display a warning if another console is openned on the same port.
- Changed the WHO command to indicate which console the user is using.
Version 1.019 (Release)
May 10, 2002
FEATURES / FIXES
***Since Version 1.018 (Release)
-Network Address Translator (NAT) now fully functional for 16 port mappings.
-Compact Flash now supported. Simpl+ file access will require Simpl Windows
2.02.06.
-Fixed a bug where a CIP node was reset when overrun with data and some data
was lost.
-Improved communications with CNX_TA card.
-Corrected an bug in reading the Ethernet status. Now displays correct Link
status, speed and duplex.
-Corrected a problem with the Memory Interlock symbol.
-Corrected a problem with the Ramp symbol when it was close to 100% and up was
hit then release. The value would jump to 0. Now the value will clip at the
boundaries.
-Changed the autonegotiation command (AUTONEG) to allow specification of the
duplex parameter.
-Improved overrun handling in the Ethernet driver.
-More messages appear on the screen during Firmware upgrades.
-Added a WHO command to print the active consoles and gateway connections.
Page 19
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales