pro2_av2_cp2_cp2e_rack2_pac2_4.003.0015.txt
lock high or not work. This could ONLY happen if you had multiple drivers
stacked on ports. An assumption was made that Port=Child Index 0, B=1, etc.
If you have multiple drivers, this no longer makes sense. NOTE: Future
revision needed to handle index '0' returned from GetParamIntegerValue()
[maybe return -1 or something?]; however the first fix will prevent the 2nd
from happening.
- Adjusted Cresnet Driver to elminate "RX error -50".
- Added a progress indication for program destruction ("Termination
Cleanup") and also for loading symbols ("Loading").
- Fixed a memory allocation bug that would lead to a slow down of the system.
- Added additional checks to the NAT portmap configurations. Check for the
same external port mapped to two different places.
- Corrected a problem with the NAT configuration pages where the reboot button
was not actually rebooting the system.
- Modified Cresnet passto timing to handle the TPS2000 reentering passto after
reboot.
- Added additional error messages to the logic processor.
- Corrected a crash in the Event scheduler when an event expires and gets
deleted by the symbol at the same time. (i.e. trigger a DELAY & resetting it
could cause this)
- Fixed a crash when selecting passthrough to a non-existent cards (i.e.
wrong slot number).
- Added a check to make sure that the port selected in the WEBPORT command has
not be remapped by the NAT.
- CNX-COM2 cards firmware upgrades now supported.
- Corrected a problem with Simpl+ WAIT statements that would use up memory and
eventually reboot the processor.
-Prevent "clear all" from being transmitted to CEN-TVAV/CN-TVAV/CNX-RMC/
CNX-RMCLV when the system receives an update request from such a device. This
resolves an issue, specifically with the CNX-RMC having all of it's video
inputs disabled when an update request was performed.
-Support for Analog Min/Max symbol. Requires SIMPL Windows Library Update
180 or later.
-Fix Analog Buffer & Serial Buffer so that the output ramping process stops
when the enable is driven low & there is a ramping process on the respective
input.
-Fix CEN-TVAV/CN-TVAV versiports & current sense. They now correctly register
HIGH when 1-4 is shorted or power is sensed on the outlet, and low otherwise.
- Changed the firmware name reported for the C2Y-COM3 card to
C2COM-3 for consistancy with the product name.
- Compact flash file system now handles deleting long file names.
- Fix operation of Serial Pacer symbol so that if a string comes into the
symbol while it is currently pacing out data, it no longer causes garbled
output or never-ending output.
- Fixed problem with "\r" as the last character of a field causing text like
"#1," to show up on thedisplay of the touch panel.
- Cresnet devices now accessible for CEN-TVAV (slave mode) and CEN-CN.
- Lighting support including Analog Comparisons (Full Set), Multiple Preset,
CLX-xDIMx, CLX-1MC4, CLX-4HSW4. SIMPL Windows Library update 180 or later is
required to use these symbols.
- Fixed a problem with CNX_I016 driver where the card would not respond.
- Fixed Memory Interlock so that CLEAR isn't needed. Also, all outputs are
mandatory now.
- Fixed analog signal encoding on XSIG so that values > 16383 are properly
encoded.
- Improved NetAnalyze performance when more than 8 devices on the network.
- Handled a crash where the password verification failed for Ethernet
consoles. Only 3 password attempts are allowed now (down from 4).
- Corrected a problem with older CNWM-10A panels where the panels would
continuouly reboot. This change is across all CNWM type panels.
- Added support for the Selective Clear-all for TPS touchpanels.
- Fixed the web server to handle excessively long URLs used in web attacks.
Changes made to the webserv code to make it more robust.
Page 17
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales